Physical Requirements - True ZTX 825HRC Owner's Manual

Setting Up Your Treadmill
Receiving and Inspection
5. Check to see if you have
received 23 items:
1 Treadmill Base/
Pedestal Assembly
2 Handrails
2 Allen Wrenches
2 Screws (3/8"-16 X 4")
4 Large Star Lock Washers
4 Small Star Lock Washers
4 Screws ( 1/4-20 X 5/8")
2 Self Drilling Screws
1 Owner's Manual
1 Warranty Card

Physical Requirements

Place your treadmill on a clean, level surface. Make sure the power cord easily reaches a
grounded three-pronged outlet and has enough slack to allow the treadmill to incline
freely without being limited by the power cord. Do not allow the treadmill to rest on the
power cord. Although your treadmill is designed to operate on most carpeted surfaces,
some deeply padded or heavy shag carpets can cause damage to your treadmill or carpet.
Have someone stand on the deck and make sure the tread belt does not touch the carpet at
any point.
Your TRUE treadmill is designed for indoor use only. Your treadmill should not be used in
the same area as hot tubs, pools, etc. Such use may void the warranty. Keep the
control panel out of direct sunlight as it may damage the materials from which the panel
is made and may result in malfunction of the unit.
Section A
(Continued)
7