Attaching The Shoulder Mount - Blackmagicdesign Blackmagic URSA Installation And Operation Manual

URSA Mini Shoulder Kit Assembly
69
To attach the shoulder mount kit to your URSA Mini you
will need a large flat head screwdriver, a 5mm hex key
driver for the top handle and a 2.5mm hex key driver for
the Viewfinder adapter plate.
To attach the shoulder mount baseplate:
Step 1. Gently place your URSA Mini upside down
on a flat, stable surface so you can easily
access the base of your camera.
Step 2. Fasten the shoulder mount baseplate to
URSA Mini using the 2 x ¼" flat head screws
and driver.
Step 3. Tighten the screws until the baseplate is
firmly attached and the screws won't loosen.
Avoid over-tightening as it may damage
the screw threads.
URSA Mini Shoulder Mount Assembly

Attaching the shoulder mount

The URSA Mini Shoulder Mount Kit lets you carry URSA Mini on the shoulder for ENG style shooting.
This kit includes a top handle, shoulder mount baseplate, extension arm for the URSA Mini side
handle, long LANC cable, Viewfinder adapter plate, plus all the required screws.
The quick release mount on the baseplate lets you lock your camera into an ENG style tripod plate
or place it on your shoulder so you can follow the action.
The URSA Mini Shoulder Mount Kit works with any tripod plate modeled after the Sony VCT 14. These
mounts are easily found at camera stores or online.
It's also worth mentioning that mounts modeled after the VCT U14 tripod plate are a different system
and are not compatible.
When attaching the shoulder mount kit, you will need the following tools:
‚ 1 x flat head screwdriver for the 2 x ¼" shoulder mount base plate screws.
‚ 1 x 5mm hex key driver for the 2 x ¼" top handle screws.
‚ 1 x 2.5mm hex key driver for the 4 x Viewfinder adapter plate M3 screws.
2 x ¼" baseplate screws Insert screws via threaded hole in slot