Playback; Playing Back Clips - Blackmagicdesign Blackmagic URSA Installation And Operation Manual

Playback

16
Use the 'play' button on the side or outside of the fold out
monitor to view your recorded clips.
Playback

Playing Back Clips

Once you have recorded your video, you can use the transport control buttons to play back your video.
Press the 'play' button once for instant playback and you'll see your recorded video on the fold out
monitor. Your clips can also be viewed on the touchscreens and any display connected to the SDI
outputs. Playback will continually play through all your recorded clips.
The controls of your camera work just like a CD player, so pressing the 'forward skip' button will skip
to the start of the next clip. Press the 'reverse skip' button once to go to the start of the current clip
or press twice to skip back to the start of the previous clip. Hold the 'forward' or 'reverse skip' button
to play or reverse at 2x speed. On Blackmagic URSA EF, you can also use the forward and reverse
skip buttons to open or close the iris on compatible lenses while recording clips.
When recording a clip using a sensor frame rate that differs from your project frame rate, your clip's
playback speed will also differ. For example, imagine you have set your camera's project frame rate
to match your post production timeline of 24 frames per second. If you record a clip with your sensor
frame rate set to 80 frames per second, your clips will play back in slow motion on both the camera
and on your post production timeline.
To ensure your clips play back at normal speed, select 'match' from the 'sensor frame rate' settings
in the 'recording' settings touchscreen menu. Refer to the 'recording settings' section of this manual
for more information about frame rates.
1 CFAST 2
2
1 CFAST