Blackmagic URSA Mini Connectors
30
Connect power and a HD video signal to a Blackmagic
URSA Viewfinder via the 4 pin 12V power output and down
converted HD monitoring output. URSA Mini PL model with
B4 connector shown.
You can mount a third party v-mount or gold mount battery
plate to Blackmagic URSA's rear panel. An URSA v-mount
battery plate with the correct molex connector can be
purchased at your nearest Blackmagic Design reseller.
Blackmagic URSA Mini Connectors
Right Side Connectors
The right side of your Blackmagic URSA Mini provides outputs for connecting a Blackmagic URSA
Viewfinder and other external monitors and accessories, plus a dedicated LANC connector for the
side handle. For more information on how to use these connectors refer to the 'Blackmagic URSA
Mini features' section.
HD Monitoring Output
3G-SDI connector for down converted 1080HD output. Use with Blackmagic URSA Viewfinder or
external monitors. Refer to the 'Camera Video Output' and 'Blackmagic URSA Viewfinder' sections
for more information.
+12V Power Output
4 pin XLR connector for powering Blackmagic URSA Viewfinder, or external monitors and accessories.
Refer to the 'Blackmagic URSA Viewfinder' section for more information.
LANC
2.5mm jack for connecting to the URSA Mini side handle. LANC supports record start and stop, plus
iris and focus control using compatible EF lenses.
Broadcast Lens Control Connector
Provides power and control to compatible B4 mount lenses with 12-pin connections. This connector
is only available on URSA Mini PL models.
Rear Connectors
Battery Plate Connector
12 way Molex connector for attaching a third party V-mount or gold mount battery plate. For more
information, refer to the 'mounting batteries' section.
LANC
2.5mm jack for external LANC remote control, such as an external record start stop control mounted
to a tripod arm. LANC supports record start and stop, plus iris and focus control using compatible
EF lenses.
12G-SDI In
This feature will be made available in a later software update.