Blackmagicdesign Blackmagic URSA Installation And Operation Manual page 43

Settings
44
Image Stabilizer
When using an EF lens mount, Blackmagic URSA or URSA Mini supports the image stabilizer feature
found in many EF lenses. Simply set the stabilizer switch to 'on' to use it with your camera.
When URSA is battery powered, the image stabilizer is activated only while recording in order to
conserve power. When external power is connected to the camera, the image stabilizer will always
be active when the lens stabilizer switch is set to 'on'.
Battery Voltage Display
On Blackmagic URSA Mini, you can change the way the battery level indicator displays the remaining
charge. There are two settings, 'on' and 'off.'
When this is set to 'off,' and you are using a battery and plates that support accurate levels, you will
see your battery power remaining as a percentage.
If you are using a plate and battery combination that does not allow percentage accurate readings,
the display will show three bars which will empty as the battery depletes.
If this option is set to 'on,' battery levels will be displayed in volts. We recommend that customers
swap the battery as it approaches 12V.