Blackmagicdesign Blackmagic URSA Installation And Operation Manual page 48

Blackmagic URSA Viewfinder
49
ZOOM
F1
DISP
F2
PEAK
F3
The Zoom (F1), Display (F2) and Peak (F3) buttons are located
on top of the URSA Viewfinder.
The 'display' menu in URSA Viewfinder
‚ ZOOM (F1) - 'menu' - The 'zoom' feature helps you find sharp focus by zooming into your
picture. Press the 'zoom' button to zoom in and press again to return to 100% view.
When using the settings menu, the 'zoom' button also serves as the 'menu' button. Press and
ZOOM
hold this button to open the settings menu. In the settings menu, press this button once to
F1
confirm setting changes.
DISP
‚ DISPLAY (F2) - 'up' - Press the 'display' button to see the overlay view. When using the
F2
settings menu, this button also serves as the 'up' button. You can also quickly open the
'shortcuts' menu setting by pressing and holding this button. Refer to the 'setting shortcut
PEAK
buttons' section for information on how to set shortcuts.
F3
‚ PEAK (F3) - 'down' - The focus peaking feature creates a green edge around the sharpest
parts of the image so you can easily confirm your focus. Press the 'peak' button to turn the
peaking feature on. Press again to turn peaking off. When using the settings menu, this
button also serves as the 'down' button. You can also quickly open the 'setup' menu by
pressing and holding this button.
Menu Settings
The settings menu contains three primary menu headings for display, shortcuts, and setup. To open
the settings menu, press and hold the 'menu'
navigate between the settings and press the 'menu'
Display
The 'display' menu provides the following features:
‚ B&W - Switches between color and monochrome.
‚ Peaking - Switches peaking on and off.
‚ Zebra - Switches zebra levels on and off. Set your desired zebra levels using the camera
settings. For more information, refer to the 'settings' section in this manual.
button. Press the 'up' and 'down'
button again to confirm your selection.
button to