Camera Assist And Audio Station - Blackmagicdesign Blackmagic URSA Installation And Operation Manual

Blackmagic URSA Overview
19
1
0
SDI OUT
-6
-12
SDI IN
-18
-24
REF IN
-30
-36
TIMECODE IN
-42
-48
TIMECODE OUT
CH1 CH1 CH2 CH2
SOLO MUTE SOLO MUTE
12V L R
IRIS
3 4 5
8
9
10
FOCUS PEAK DISP MENU SLATE
2
FOCUS PEAK DISP MENU SLATE
6 7

Camera Assist and Audio Station

Work Station Features
1. AUDIO METERS
Monitor your audio levels using the ch 1 and ch 2 audio meters. Page 24.
2. TOUCHSCREEN
The 5" touchscreen display is used for monitoring your camera image and scopes, and applying
camera settings. Page 25.
3. AUDIO MONITORING MUTE AND SOLO
Press these buttons to mute and monitor selected audio channels. Page 24.
4. AUDIO LEVEL ADJUSTMENT KNOBS
Adjustment knobs to set the recording levels for the left and right audio channels. Page 24.
5. HEADPHONES
1/4" jack output for headphones monitoring. Page 21.
6. LANC REMOTE
2.5mm stereo jack for LANC remote control. LANC supports record start and stop, iris and focus
control. Page 21.
7. WORK STATION BUTTONS
Activates various camera controls and the touchscreen menu for adjusting settings. Page 23.
8. HD-SDI MONITORING OUT
3G-SDI connector for down converted 1080 HD output. Pages 21 and 46.
9. +12 V POWER OUTPUT
4 pin XLR connector for powering accessories, such as the Blackmagic URSA viewfinder. Page 21.
10. XLR AUDIO IN
XLR inputs for plugging in external balanced analog audio with selectable 48 V phantom power. Page 21.