Blackmagicdesign Blackmagic URSA Installation And Operation Manual page 12

Recording
13
After setting your codec and resolution, you should set your 'project' and 'sensor' frame rates. Refer
to the 'recording settings' section in this manual for more information about frame rates.
A table is provided showing the supported 'project' frame rates for each recording format and codec.
You can create dynamic speed effects by using a sensor frame rate that is slower or faster than your
project frame rate. For standard playback, match the sensor frame rate to your project frame rate.
Recording Formats and Project Frame Rates
4000 x 2160 4K RAW
4000 x 2160 4K RAW 3:1
3840 x 2160 Apple ProRes 444 XQ
3840 x 2160 Apple ProRes 444
3840 x 2160 Apple ProRes 422 HQ, ProRes 422,
ProRes 422 LT and ProRes 422 Proxy
1920 x 1080 Apple ProRes 444 XQ
1920 x 1080 Apple ProRes 444
1920 x 1080 Apple ProRes 444
1920 x 1080 Apple ProRes 422 HQ, ProRes 422,
ProRes 422 LT and ProRes 422 Proxy
23.98, 24, 25, 29.97, 30, 50, 59.94 and 60 frames
per second using dual card mode.
23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
23.98, 24, 25, 29.97, 30, 50, 59.94, 60.
23.98, 24, 25, 29.97, 30, 50, 59.94, 60.