Blackmagicdesign Blackmagic URSA Installation And Operation Manual page 71

URSA Mini Shoulder Kit Assembly
72
Attaching the extension arm
When using the URSA Mini shoulder mount kit,
you'll need to reposition URSA Mini's side handle
for comfortable shoulder based shooting. Use the
bundled extension arm and longer LANC cable to
move the side handle to a more ergonomic position.
To attach the side handle extension arm:
Step 1. Place your URSA Mini on a flat, stable
surface allowing room next to the camera
to lower the extension arm. Mounting URSA
Mini to a tripod is helpful for this purpose.
Step 2. Attach the indented end of the extension
arm to the baseplate rosette, lower the
arm to suit, and fasten with the supplied
rosette thumbscrew.
Step 3. Attach the side handle to the extension
arm's front rosette. Fasten by tightening
the side handle screw with the large flat
head screwdriver, or by twisting the D ring
with your thumb and forefinger.
Step 4. Connect the side handle LANC output
to the camera LANC input using the long
LANC cable supplied with your shoulder
mount kit.
You can easily adjust the extension arm and side
handle to suit your preference by loosening the rosette
screws, making your adjustment, then retightening.
With your URSA Mini Shoulder Mount Kit now
attached, you have additional speed for fast shooting
on the run, plus the ability to quickly mount your
camera on a tripod for tight, stable shots!
Side handle extension arm
Extension arm attaches to Connect the side handle to the camera using
baseplate rosette the long LANC cable supplied with the kit
Side handle
Tighten via side handle screw