Blackmagicdesign Blackmagic URSA Installation And Operation Manual page 23

Blackmagic URSA Features
24
0
-6
-12
-18
-24
-30
IRIS FOCUS PEAK
-36
-42
-48
CH1 CH2 CH2
MUTE SOLO MUTE
R
IRIS FOCUS PEAK
The 'menu' button opens the touchscreen menu for access to
many of the camera settings.
SDI OUT
SDI IN
REF IN
0
SDI OUT
-6
-12
SDI IN
-18
-24
REF IN
-30
-36
TIMECODE IN
-42
TIMECODE IN
-48
TIMECODE OUT
CH1 SOLO CH1 MUTE CH2 SOLO MUTE CH2
12V L R IRIS FOCUS PEAK DISP MENU SLATE
MENU SLATE
TIMECODE OUT
12V
Set and monitor levels of left and right audio channels using
the adjustment knobs and audio meters.
MENU Button
Press the 'menu' button to activate the settings menu on the touchscreen. Press menu again to close.
SLATE Button
Press the 'slate' button to activate the slate feature on the touchscreen. Press slate again to close.
The slate feature lets you enter metadata for your clips and set your camera ID. See the 'entering
metadata' section of this manual for more information.
DISP MENU SLATE
POWER Button
Press and release the 'power' button to turn on your Blackmagic URSA. Press and hold to turn your
camera off.
CH SOLO and MUTE Buttons
DISP MENU SLATE
During recording and playback, these buttons let you monitor your ch 1 and ch 2 stereo audio channels
independently via headphones. For example, to monitor only ch 1 audio, press the 'ch 1 solo' button
or the 'ch 2 mute' button. Press the button again to monitor both channels.
CH 1 SOLO Button
0
To monitor ch 1 only, press the 'ch 1 solo' button.
-6
CH 1 MUTE Button
-12
To mute the audio on channel 1 and monitor only channel 2, press the 'ch 1 mute' button.
-18
-24
CH 2 SOLO Button
-30
To monitor ch 2 only, press the 'ch 2 solo' button.
-36
CH 2 MUTE Button
-42
To mute the audio on channel 2 and monitor only channel 1, press the 'ch 2 mute' button.
-48
Audio Level Adjustment Knobs
CH1 CH1 CH2 CH2
SOLO MUTE SOLO MUTE
Turn each knob clockwise or counterclockwise to increase or decrease the recording level for each
L R
IRIS
channel of audio. As you adjust each knob you'll see the corresponding audio meters respond.
Audio Meters
The audio meters display the strength of your recorded audio. If your audio levels rise too high, your
audio peaks can be clipped and you will hear distortion in your audio.
FOCUS PEAK DISP MENU SLATE