Accessing Your Messages - AT&T SB67035 User Manual

Synapse SB67035 Deskset User's Guide
After someone listens to a message, the [NEW] indicator for that message is

removed from the screens of all participants of that group.
If someone else is listening to a message when you delete it, the message is not

deleted until the listener exits the voicemail session.
Message playback is not interrupted if you receive a call while playing Group

Mailbox voicemail. The incoming call appears on the Deskset screen
accompanied by a call-waiting tone. (There is no call-waiting tone in Line
Appearance mode.)

Accessing Your Messages

Access to your messages is different depending on whether or not you have access to
any Group Mailboxes, and whether you have enabled voicemail distribution. If you do not
have access to a Group Mailbox, and you have not enabled voicemail distribution, you
can access just your new messages by selecting # New Messages on the Idle screen.
A list of your new messages appears. You can also access all messages (old and new) by
pressing MESSAGES. A list of all messages appears.
To access your voicemail:
1. From the Idle screen, press MESSAGES. If necessary, use the dial pad to enter your
user password and press SELECT.
The screen that appears depends on your system configuration.
If you do not have voicemail distribution enabled or access to a Group Mailbox, the
Messages list appears.
Voicemail
Messages
[1 New, 6 Old] Personal
[FULL] Sales
[< 5 min] Support
Press or
press SELECT.
Figure 31. Full Group Mailboxes
Once you have entered your password, you do not have to enter it again
while you are reviewing messages. However, if you exit the Messages
screen, you will need to enter your password to access the Message list.
79
Quick
to move highlight, then
Dial
Back to Contents