Incoming Calls In Line Appearance Mode; Answering A Call - AT&T SB67035 User Manual

Synapse SB67035 Deskset User's Guide
When there are no available Call Appearances, incoming calls are forwarded according
to the Call Forward–No Answer setting customized by the system administrator. The
default setting for Call Forward–No Answer is Voicemail.

Incoming Calls in Line Appearance Mode

Incoming calls appear as shown in Figure 17 and Figure 18, except that the
key and the navigation arrows (
press the Line Appearance key for the desired call.
If someone at another Deskset answers the call, your Deskset returns to Idle mode.
If your extension is part of a Ring Group, a group of extensions may ring all at once.

Answering a Call

To answer a call:
Lift the corded handset.

Press

on page
Press SPEAKER to use the speakerphone.

Press HEADSET to use a cordless or corded headset. See

Using a Headset" on page
For multiple incoming calls, press

Appearance or Line Appearance key to answer each call. You can also press
The active call screen appears.
12:30PM Thu Feb 25 2010
Graham Bell
Transfer
Call Appearance Mode
Incoming Calls

to answer using the Preferred Audio Mode. See
Answer
108.
to return the highlight to your active call.
Ignore
232-555-0176 0:11
Quick
Dial
Conf Park More 1/3
If you are listening to voicemail when a call comes in, press
Call Appearance mode)
playback to continue.
If Auto Answer is enabled, the call is automatically answered after the set
time delay. See "Auto Answering" on page

and ) do not appear. To switch between active calls,
53.
or press the corresponding Call
Answer
12:30PM Thu Feb 25 2010
Graham Bell
Transfer
Line Appearance Mode
to redirect the call and allow message
FwdVM
38.
35
Back to Contents
soft
FwdVM
"Preferred Audio"
"Call Management
232-555-0176 2:51
Quick
Dial
Conf Flash More 1/2
or (in
Ignore