Putting A Conference On Hold - AT&T SB67035 User Manual

Synapse SB67035 Deskset User's Guide
If you hang up while on the conference, the conference ends. If you make or answer
another call, the conference continues without you. You can rejoin by pressing a
corresponding Call Appearance or Line Appearance key.

Putting a Conference on Hold

The pictures below show Call Appearance mode, but the procedure is the same in Line
Appearance mode.
To put a conference on hold:
1. Press HOLD.
The other callers can continue communicating with each other. The icon
indicates the conference is on hold.
hold.
A conference is automatically put on hold when you:
Press an available Call Appearance or Line Appearance key to start a new call.

Answer an incoming call.

To take a conference call off hold:
1. Press a corresponding Call Appearance or Line Appearance key.
Call Management
12:30PM Thu Feb 25 2010
232-555-0176
232-555-7154
To retrieve held conference, press key
next to either conference call.
is unavailable during an active call if you have another conference on
Conf
Conference Call
Conference Call
Quick
Dial
Drop Page
50
Back to Contents