NV11 Manual Set – Section 3
Click the 'Start Diagnostic' button to start the diagnostic process. The software will
then prompt you to insert a special piece of green diagnostics paper (ITL part number
LB149). Insert the paper in the same way you would with a bank note – at the end of
the diagnostics test the paper will be ejected.
Copyright © Innovative Technology Ltd 2012
Select the 'Diagnostics' item from
the 'Utilities' menu to start the
diagnostics process (you can also
start the diagnostics by clicking
on the left hand icon below the
menu bar) - this will open the
Diagnostics screen:
37
GA963-2