Innovative Technology NV11 User Manual page 40

NV11 Manual Set – Section 2 14
Foreign objects in Check and clean the note path (see subsection 2.1 of
note path this manual).
Check voltage and current supplied to the validator are
Acceptor runs slowly Incorrect supply within the tolerances specified in the Technical
or intermittently voltage Specification (see subsection 2.3 of this manual).
If possible, replace damaged components (see Section 4
of this manual set).
Unit damage
IF YOU HAVE ANY DOUBTS, RETURN THE UNIT TO
ITL FOR REPAIR
Bezel LEDs are Check the flash code tables for an understanding of the
Various reasons
flashing issue (see Subsection 2.2 of this manual).
Check and clean the note path (see Subsection 2.1 of
this manual), then reset the validator.
Motor continues to Foreign object or
run note in the note path
In some cases you may also need to reset the host
machine.
If you are unsure about the cause or how to resolve the problem, please contact ITL's
technical support department. Support contact details can be found on the ITL
website (www.innovative-technology.co.uk), or on the last page of this section.
Copyright © Innovative Technology Ltd 2012 GA963-2