Innovative Technology NV11 User Manual page 13

NV11 Manual Set – Section 1
Caution!
Validator head MUST be
opened.
3. Remove the blanking
plate by disengaging
the two side clips and
lifting the blanking
plate upwards
4. Close the validator
head and then
carefully fit the Note
Float module onto the
validator head,
making sure the rear
cover is securely
closed and that both
latches are lined up
correctly
5. Make sure both
latches are engaged
and closed
Copyright © Innovative Technology Ltd 2012
Always make sure the validator head has been
opened BEFORE trying to remove the blanking
plate – trying to remove the blanking plate with
the validator head closed will cause unit
damage.
4
Side clips
Rear cover
Latch
GA963-2