Ethernet Leds - Sierra Wireless AirLink GX Series Hardware User's Manual

Table 2-3: LED Behavior
LED Color / Pattern
Network Solid Green
Flashing Amber / Green
Flashing Green
(3 sec. on / 1 sec. off)
Flashing Green
(1.0 sec. on / 0.5 sec. off)
Flashing Amber /Green / Off
Flashing Amber
Solid Amber
Flashing Red
Solid Red
Activity Off
(ALEOS
Flashing Green
4.3.6 or
earlier)
Activity Off
(ALEOS
Flashing Green
4.4.0 or
later)
Flashing Red
Flashing Amber
Rev 8 Nov.15
Network Ready — (LTE service available for GX440)
Network Ready — (No LTE service available for GX440)
Network Ready—WAN over Wi-Fi (gateway in Wi-Fi client mode)
Network Ready—Roaming (LTE service available for GX440)
Network Ready—Roaming (No LTE service for GX440)
No Service
Connecting to the network
Authentication/Negotiation failed (EV-DO only)
Link Down
No cellular network is present, no network coverage at current
location, or the gateway is in radio passthru mode
Normal operation
Traffic is being transmitted or received over the WAN interface.
Normal operation
Traffic is being transmitted or received over the WAN interface.
Traffic is being transmitted or received over the serial port. (This
behavior only appears if the AirLink GX Series gateway is configured
to display it. Refer to the ALEOS Software Configuration Guide for
details.)
Traffic is being transmitted or received over both the WAN interface
and the serial port. (This behavior only appears if the AirLink GX
Series gateway is configured to display it. Refer to the ALEOS
Software Configuration Guide for details.)

Ethernet LEDs

Connection speed
Figure 2-19: Ethernet LEDs
Installation and Startup
Description
Activity
33