AirLink GX Series Hardware User Guide
10
Gateway Description
Front Panel
The front panel has the following indicators and controls:
Figure 1-1: GX Series Front Panel
•
LEDs – These show the gateway's operating status. The LEDs are described
in detail in
LED Operation
•
Reset Button – Momentarily pressing and releasing this button reboots the
GX Series gateway.
Note: Holding the Reset button down for 7–10 seconds resets the GX Series gateway to
its factory default settings.
Rear Panel
The rear panel has the following connectors and controls:
GPS Antenna
Antenna
Connector
Connector
USB Port
Figure 1-2: GX Series Rear Panel
•
Antenna Connector – This is the radio's receive and transmit port.
(SMA connector)
on page 32.
Diversity/AUX
Antenna Connector
Serial Port
LEDs
Reset Button
Ethernet
Connector
Power Connector
4114008