Gateway Management; Power Consumption - Sierra Wireless AirLink GX Series Hardware User's Manual

AirLink GX Series Hardware User Guide
60

Gateway Management

• AirLink Management Service cloud-based gateway management application
For more information, go to www.sierrawireless.com/ALMS.
• ACEManager web-based gateway configuration software
For more information, refer to the ALEOS Software Configuration User Guide.
• AT Commands
For more information, refer to the ALEOS Software Configuration User Guide.
ALEOS Application Framework
• Lua language coding platform
• Remote application management
• Eclipse-based IDE
• Integrated real-time debugging
Input/Output
• Configurable I/O on power connector
• Input ON voltage: 3.3 VDC to 30 VDC
• Input OFF voltage: 0 VDC to 1.2 VDC
• Output maximum switching capability 200 mA @ 30 VDC

Power Consumption

Table 4-13: GX Series gateway power consumption (without X-Card)
AirLink GX Series Gateways (no X-Card installed)
Maximum current draw at 12 V
Typical current draw at 12 V
Low Power Mode current draw at 12 V
Additional Power Consumption with X-Cards Installed
Table 4-14 outlines the increase in power consumption if you have an X-Card
installed in the GX Series gateway.
Table 4-14: Additional power consumption with X-Card installed
Dual Ethernet
Change Typical 148 mA
Change Maximum 200 mA
a. Values are averaged over 2 minutes at +12 V at room temperature.
1 A
0.45 A
50 mA
Wi-Fi X-Card
X-Card
110 mA
155 mA
a
Serial I/O X-Card
19 mA
30 mA
4114008