Gateway Description; Front Panel; Rear Panel - Sierra Wireless AirLink GX450 Hardware User's Manual

AirLink GX450 Hardware User Guide

Gateway Description

Front Panel

The front panel has the following indicators and controls:
Figure 1-1: GX450 Front Panel
•
•
Note: Holding the Reset button down for 7–10 seconds resets the GX450 gateway to its factory
default settings.

Rear Panel

The rear panel has the following connectors and controls:
Connector
Figure 1-2: GX450 Rear Panel
•
Note: For more information on antenna connection and use, see
Rev. 11 July 2019
LEDs – These show the gateway's operating status. The LEDs are described in detail
in LED Operation on page 30.
Reset Button – Momentarily pressing and releasing this button reboots the GX450
gateway.
Antenna GPS Antenna
Connector
USB Port
Antenna Connector – This is the radio's receive and transmit port (SMA connector).
LEDs
Diversity/AUX
Antenna Connector
Serial Port Power Connector
8
Reset Button
Ethernet
Connector
Antenna Installation on page 27.
4114008