Connection Of The Regulator By Hydraulic Schemes; Wood Gasifying Boiler + Heating Circuit - ATTACK DPX15 Instructions For Use Manual

3.3 CONNECTION OF THE REGULATOR BY HYDRAULIC SCHEMES

The regulator can control several types of hydraulic schemes. Parameters in the service menu
must be correctly set adequately to the type of the hydraulic scheme.
Note: The additional thermal probe to control the additional output is connected by production
and it is rolled in the control panel of the boiler. To use the probe it is necessary pull it out from
the control panel through the prepared plastic bushing. This action can be performed only by a
qualified person or by a person trained by producer. The regulator is set by production for the
simple control of heating circuit following the scheme 3.1. On the below mentioned schemes
there is connection of the pumps and sensors. Correct connection of the pumps and sensors is
given on schemes. Connection of the fan and connection of the regulator to the electricity mains
is not drawn.

3.3.1 WOOD GASIFYING BOILER + HEATING CIRCUIT

Parameter setting for the hydraulic scheme 3.1:
ur = ur0
16