Connection Of The Profi Pid Regulator By Hydraulic Schemes - ATTACK SLX20 Instructions For Use Manual

6.3.3 CONNECTION OF THE PROFI PID REGULATOR BY HYDRAULIC SCHEMES

The regulator can control several types of hydraulic schemes. Parameters in the service menu
must be correctly set adequately to the type of the hydraulic scheme.
Note: The additional thermal sensor for controlling the additional output is connected by pro-
duction and it is rolled in the control panel of the boiler. To use the sensor, it is necessary pull it
out from the control panel through the prepared plastic bushing. This action can be performed
only by a qualified person or by a person trained by producer. Regulator is set by production for
the simplest control of heating circuit according to the scheme 7. Schemes show connection of
pumps and sensors. There is not shown connection of the fan and connection to the mains on
the schemes.
Scheme 7: Gasifying boiler + heating circuit
Setting parameters for hydraulic scheme 7:
32