Function And Displaying The Text By Igniting Or Refilling The Fuel; Display Of The Operating Mode By The Boiler Started - ATTACK DPX15 Instructions For Use Manual

4.5 FUNCTION AND DISPLAYING THE TEXT BY IGNITING OR
REFILLING THE FUEL
After pressing the „+"button it comes to the following procedure:
 The boiler is started the indicator light 1 flashes and the ignition is running
 The text is displayed:
DO NOT OPEN!
WAIT
 the flue gas fan and regulation of burning are started
 the supply pump and regulation of the return and supply valve are started
 the generator of an alternative energy is stopped by the switch
 after 5 seconds appears the text:
FUEL DOOR UNLOCKED
 and in 10 seconds is the electromagnetic door-lock released (is it is disposable)
 after 10 seconds appears the text:
CAUTION!
OPEN SLOWLY!
 after 5 seconds appears the text:
IGNITION
 Prepare and ignite the fuel following the instructions on the page 11, close the feeding door
partly. If the bar chart is full, the fuel is ignited, close the door.
 If the bar chart is full and ignition or process of fuel loading takes more than 15 minutes, it is
switched to the operating display mode.
 The regulator stops the boiler after 15 minutes, if:
 There was no ignition and the regulator started the burning process despite of that fact,
because it was accidentally started by the „+"button.
 The fire extinguished after closing the door, because there was lack of wood splinters or the
fuel is too wet.

4.6 DISPLAY OF THE OPERATING MODE BY THE BOILER STARTED

 Text on display:
BOILER TEMPERATURE
˚C
 After 5 seconds appears the next text:
FLUE GAS TEMPERATURE
˚C
 This text appears on display every 5 seconds.
30