Cancellation Of The Producer´s Function - ATTACK DPX15 Instructions For Use Manual

4.14 CANCELLATION OF THE PRODUCER´S FUNCTION
For this procedure you need the code from producer. It is possible to set the operating hours of
the boiler, number of overheating states and the last 10 burnings to 0.
Enter and exit from the appropriate submenu is the same as it is given in the chapter 8.1. If no
button is pressed within 1 minute, the regulator automatically switches to the operating mode.
Option
Information
Test of device
Safety test
Setting
End
Testing
The test of device and safety test have to be done by the presence of the technician!
Test of device
The test of device can be done only when the boiler is turned off!
The test can be done, only when there is no danger of overheating!
The test is selected and done by the menu button „←" (enter into the menu of Options). In the
next menu there is a „test of device" found by the „–" button and the confirmed by the button
„←". The appropriate step of the test is activated by the „+" button and deactivated by the „–"
button. The next step is selected by the „←" button.
The test of device is completed after the last point of the test by the „←" button and the display is
automatically switched to the operating mode. The test can be interrupted by pressing the
buttons „+" and „–" at once.
If no button is pressed within 15 minutes, the display is automatically switched to the operating
mode.
Submenu
Code
---
Cancel
NO/YES
33: Output reduction
NO/YES
Indication
Enter the code from producer by the „+" button.
The random number is displayed on the right
side. Change it to the code from producer and
confirm by the button „←". The next setting is
displayed.
Select „YES" by the „+" button. After pressing the
„←" button is the explanation of the setting
displayed and the menu is closed.
By selecting „YES" you can set the boiler
operating hours and the total excessive
temperature, the last 10 burnings are set to 0.
Select „YES" by the „+" button. After pressing the
„←" button is the explanation of the setting
displayed and the menu is closed.
By selecting „YES", the boiler output is reduced
by 20 % is the boiler temperature exceeds the
adjusted temperature for 2K.
35