Sequencer Mode - Yamaha SY55 Product Manual

briefly when quantization is finished.
Details: Quantization is generally used to tighten up
sloppy timing. Use it judiciously, however, be-
cause timing that is too perfect can sound cold
and mechanical — unless, of course, you're spe-
cifically aiming for a cold, mechanical feel.
Always use a quantize value that is at least as
"short" as the shortest notes in the track to be
quantized. If you quantize a track containing
16th notes to 1/8 (8th notes), for example, some
of the 16th notes will be aligned with 8th note
beats, thus ruining the track.
The various quantize values correspond to
note lengths as follows:
• Quantize/note correspondences
Summary: Deletes the specified measure or range
of measures from all tracks.
Settings: Beginning and end measure numbers.
Procedure: Use the [ ] and [ ] cursor keys to
select the beginning (leftmost) or end (right-
most) measure parameter. Use the [DATA EN-
TRY] control, [-1/NO] and [+1/YES] keys, or
numeric and [ENTER] keys to select the measure
numbers.
After selecting the desired measure numbers,
press the [ENTER] key. "Sure?" will appear on
the upper line of the display. Press the [+1/YES]
to delete the selected measures or [-1/NO] to
cancel the operation.
One measure of 8th notes before quantization.
After quantization.
DELETE
"Executing!" will appear on the display dur-
ing delete, and "Completed!" will appear briefly
when the delete operation is finished.
Details: It's important to remember that a delete op-
eration affects all tracks simultaneously, and that
measures following the deleted range are moved
back to take the place of the deleted measures.
Delete M004—006
Measure 4 through 6 deleted.
Subsequent measures moved back.

SEQUENCER MODE

JOB 3
1 2 3