Yamaha SY55 Product Manual page 126

Summary: Inserts a specified measure or range of
measures from all tracks before any other speci-
fied measure.
Settings:
Beginning and end source measure numbers.
Destination measure number.
Procedure: Use the [ ] and [ ] cursor keys to
select the beginning source measure (the left-
most parameter), the end source measure (the
center parameter), or the destination measure
(the rightmost parameter). Use the [DATA EN-
TRY] control, [-1/NO] and [+1/YES] keys, or
numeric and [ENTER] keys to select the measure
numbers.
After selecting the desired source and desti-
nation measures, press the [ENTER] key. "Sure?"
Summary: Copies a specified measure or range of
measures from one track to the specified meas-
ure in another track.
Settings:
Source and destination track numbers: 1 ... 8
Beginning and end source measure numbers.
Destination measure number.
Procedure: Use the [ ] and [ ] cursor keys to
select the source track (leftmost parameter, up-
per line), destination track (rightmost parame-
1 2 4
INSERT
will appear on the upper line of the display.
Press the [+1/YES] to insert or [-1/NO] to cancel
the operation.
"Executing!" will appear on the display dur-
ing insert, and "Completed!" will appear briefly
when the insert operation is finished.
Details: Insert affects all tracks simultaneously. The
source measure or range of measures in inserted
before the specified destination measure.
Insert M002 — 004
Measure 6 moved up; measures 2,3 and 4 inserted.
Result with new measure numbers.
COPY
ter, upper line), beginning source measure (left-
most parameter, lower line), end source measure
(center parameter, lower line), or destination
measure (rightmost parameter, lower line). Use
the [DATA ENTRY] control, [-1/NO] and [+1/
YES] keys, or numeric and [ENTER] keys to se-
lect the track and measure numbers.
After selecting the desired source and desti-
nation tracks/measures, press the [ENTER] key.
"Sure?" will appear on the upper line of the
display. Press the [+1/YES] to copy or [-1/NO] to
cancel the operation.
"Executing!" will appear on the display dur-
ing copy, and "Completed!" will appear briefly
when the copy operation is finished.
006
JOB 4
JOB5