Drum Set Voice Name; Drum Set Voice Recall - Yamaha SY55 Product Manual

Summary: Assigns a name of up to 10 characters to
the current drum voice.
Settings: The following characters are available for
use in voice names:
Summary: Recalls the last drum voice edited from
the SY55 edit buffer.
Settings: None
Procedure: After selecting the "DRUM Edit Re-
call" display, press the [ENTER] key. "Sure?"
will appear on the upper line of the display.
Press the [+1/YES] to initialize or [-1/NO] to
cancel the initialize operation.
"Completed!" will appear briefly when the
recall operation is finished.

DRUM SET VOICE NAME

Procedure: Use the
Details: It's a good ideas to give your voices names

DRUM SET VOICE RECALL

Details: Even if you've exited the drum edit mode
and
place the underline cursor under the character to
be changed. Use the [DATA ENTRY] control or
[+1/YES] and [-1/NO] keys to select the desired
character. Continue until the entire drum voice
name has been programmed.
that make the voice easily identifiable. If you've
created a new drum voice designed specifically
for a jazzy sound, for example, you could call it
something like "Jazz Set".
and called a different voice, this function will
recall the last drum-set voice edited with all
parameters as they were at the time the drum
edit mode was exited.
Please note, however, that a compare opera-
tion overwrites the recall buffer with the con-
tents of the edit buffer at that time. A recall
operation following a compare operation will
therefore recall the contents of the edit buffer at
the time of the compare operation.
DRUM EDIT MODE
JOB 1 1
cursor keys to
JOB 1 2
1 0 1