Yamaha SY55 Product Manual page 26

Move the cursor to all the remaining channel positions (5 ... 16) and
turn each "off by holding the [-1/NO] key until the "off" display
appears. Note that the cursor can be moved past the end of the display
screen to access the remaining channels in groups of four.
6. Press the [PAGE
job: Volume ("REFERENCE" section, page 108).
7. The volume job operates in basically the same way as the voice assign-
ment job described above. The
the channel/voice for which the volume is to be adjusted, then the [DATA
ENTRY] control, [+1/YES] and [-1/NO] keys, or numeric and [ENTER] keys
are used to set the desired volume. A setting of "0" produces no sound
while a setting of "127" produces maximum volume.
With the Jazz Quartet setup, the relatively gentle wood bass sound
tends to become "buried" under the other instruments, so leave its volume
setting at the maximum of 127, and lower the other three voices to about
110.
Volume
Piano . . . . . . . . . . . . . 110
WdBass Duo .......127
Vibraphone . . . . . . . 110
Drum Set 1 .........110
8. Press the [JOB] key, the numeric [5] key, and then the [ENTER] key to
move to the Reserved Note job ("REFERENCE" section, page 110). We'll
skip the Note Shift and Tune ("REFERENCE" section, page 109) jobs for
this setup, since we don't need to tune or transpose the pitch of any of the
voices in the Jazz Quartet setup.
key to move to the next MULTI PLAY EDIT mode
and
TUTORIALS
cursor keys are used to select
23