Yamaha SY55 Product Manual page 143

Summary: Displays the titles (song names) of se-
quencer songs stored on a memory card.
Settings: Song 1 ... 8.
Procedure: This function can only be selected if a
memory card formatted for sequencer data (55
SEQ) is inserted in the DATA card slot.
After selecting the card bank containing the
songs you want to browse through using the
MEMORY CARD BANK SELECT job de-
scribed above, select this job. Use the [DATA
Summary: Saves a single sequencer song to a mem-
ory card.
Settings:
Internal song number: 1 ... 8.
Card song number: 1 ... 8.
Procedure: This function can only be selected if a
memory card formatted for sequencer data (55
SEQ) is inserted in the DATA card slot.
After selecting the card bank to which the
data is to be saved using the MEMORY CARD
BANK SELECT job described above, select this
job and use the [DATA ENTRY] control, the [-1/
NO] and [+1/YES] keys, or the numeric and [EN-
TER] keys to select the internal song number you
want to save to the card. Then press the [ ] to
move the cursor to the card song number pa-
rameter, and select the card song number to
which you want to save the song. When you're
ready to save, press [ENTER]. "Sure?" will ap-
pear at the top of the screen. Press [+1/YES] to
actually begin saving. "Executing!" will appear
CARD SONG DIRECTORY
Details: This job is particularly handy if you have
SAVE 1 SONG
Details: Exercise caution when saving data to a
ENTRY] control, the [-1/NO] and [+1/YES] keys,
or the numeric and [ENTER] keys to select the
desired song number. The corresponding song
name will be shown to the right of the song
number on the display.
several memory cards and you don't remember
which one contains a specific song you're look-
ing for.
during the save operation, and "Completed!"
will appear briefly when the operation is fin-
ished.
memory card — the previous card data will be
erased and completely replaced by the saved
data.
A data save operation can only be carried
out if the memory card WRITE PROTECT
switch is turned OFF (refer to your MCD64 or
MCD32 Memory Card instructions for details).
If you attempt to save with the WRITE PRO-
TECT switch set to ON, the following error dis-
play will appear:
If this happens, press the [EXIT] key to re-
turn to the previous display.
UTILITY MODE
JOB 18
JOB 19
1 4 1