Yamaha SY55 Product Manual page 36

Use the [DATA ENTRY] control or [-1/NO] and [+1/YES] keys to select
"Staccato:50%," "Normal: 80%," or "Slur:99%." The percentage values
are the gate time of the notes. Gate time is the time between the beginning
of one note and the beginning of the next. Once the desired gate time has
been set, press the [PAGE
and continue recording.
Switching Voices Mid-track
You can switch to a different voice anywhere in a track by entering a
program change command at the required point. After moving the cursor
to the point at which you want to change voices in the step record edit
display, press the [PAGE
the program change display.
Select the desired bank and voice in the normal way, then press the
[ENTER] key. The display will return to the step record edit display, and a
"p" will occur at the point at which the program change command was
entered. Program change commands can be erased in the same was as
notes by using the [ERASE] key.
7. Press the [STOP] key to exit the step record mode and return to the
sequencer play mode.
key to return to the step record edit display
key twice or the [PAGE
TUTORIALS
key once to select
33