Drum Edit Mode; The Effect Copy Function - Yamaha SY55 Product Manual

The Effect Copy function makes it possible to
copy the effect parameter assignments from any
other voice or multi-timbral setup to the drum voice
currently being edited.
1. Make sure the drum edit mode is engaged and
that one of the EFFECT functions is selected.
2. Press the [STORE/COPY] key. The following dis-
play will appear.
3. Use the and
Multi/Voice parameter and select "multi" if you
want to copy effect parameters from a multi-
timbral setup, or "voice" if you want to copy the
effect parameters from a preset or internal voice.
4. Next, the cursor to the multi or voice number
parameter by pressing the
the multi-timbral setup or voice from which the
parameter data is to be copied by using the
[DATA ENTRY] control, [-1/NO] .and [+1/YES]
keys, or numeric and [ENTER] keys. The [INTER-
NAL], [CARD],or [PRESET] key can be used to
select the "P" (preset) or "I" (internal) voice
bank if necessary — or, if a properly formatted
memory card is inserted in the DATA card slot,
the "C" or" " card bank.

The Effect Copy Function

cursor keys to move to the
key, and select
5. Press the [ENTER] key. "Sure?" will appear on
the top line of the LCD.
6. Press the [+1/YES] key to confirm and actually
execute the copy operation, or [-1/NO] to cancel.
"Executing!" will appear briefly on the display
while the data is being copied, then "Com-
pleted!" will appear for a few seconds when the
copy operation has been successfully completed.
7. When the copy operation has finished, the SY55
will return automatically to the display that was
showing immediately prior to activation of the
effect copy function.

DRUM EDIT MODE

95