Octal Mode - Yamaha DX711 Series Manual

ENGINE menus
ENGINE
Single mode
single E2- 15 = К —
See the next page about selecting Voices.
Dual mode
»Voice mode
. dual
In the Dual mode, you can layer any two DX voices
together. This means that when you play any note, both
Voice A and Voice B will play together. This also means
that the polyphony of the DX is reduced to В notes in this
mode.
If your DX is set to the Dual mode, the Dual Detune
screen will appear as you cycle through the menus. This
parameter will shift the pitch of both Voices in equal
increments of 1/32 steps (= original pitch, 8-1/4 stop
дешпе.) Voice A is shifted up, and Voice B is shifted
'See the next page about selecting Voice A and
Voice B.
Split mode
>Voice mode
In the Split mode, you can choose a pointon the OX
keyboard where Voice A and Voice B are split (one part
M ihe DX is set to Split made, the Split Point screen will
appear as you cycle thr the menus - this is where you
set which rote will mark the spit between the OX
Voices. You can set his point by moving the data епу
slider, or by simply pressing the actual rote down on the
keyboard,
> Split point
G44
See the next page about selecting Voice A and
Voice B.
Octal mode
> Voice mode
octal
Inthe Оса! mode, you can play up to 8 DX Voices
simultaneously. Please see the Octal mode chapter for a
full explanation.
25