Yamaha SY55 Product Manual page 142

Summary: Saves all sequencer data to a memory
card.
Settings: None.
Procedure: This function can only be selected if a
memory card formatted for sequencer data (55
SEQ) is inserted in the DATA card slot.
After selecting the card bank to which the
data is to be saved using the MEMORY CARD
BANK SELECT job described above, press [EN-
TER]. "Sure?" will appear at the top of the
screen. Press [+1/YES] to actually begin loading.
"Executing!" will appear during loading, and
"Completed!" will appear briefly when the load
operation has finished.
Summary: Loads all sequencer data from a mem-
ory card into the SY55 sequencer.
Settings: None.
Procedure: This function can only be selected if a
memory card formatted for sequencer data (55
SEQ) or (YS SEQ) is inserted in the DATA card
slot. After selecting the card bank containing the
data to be loaded using the MEMORY CARD
BANK SELECT job described above, select this
job and press [ENTER]. "Sure?" will appear at
1 4 0
SAVE ALL SEQ DATA
Details: Exercise caution when saving data to a
memory card — the previous card data will be
erased and completely replaced by the saved
data.
out if the memory card WRITE PROTECT
switch is turned OFF (refer to your MCD64 or
MCD32 Memory Card instructions for details).
If you attempt to save with the WRITE PRO-
TECT switch set to ON, the following error dis-
play will appear:
turn to the previous display.
LOAD ALL SEQ DATA
Details: Exercise caution when loading data from a
A data save operation can only be carried
If this happens, press the [EXIT] key to re-
the top of the screen. Press [+1/YES] to actually
begin loading. "Executing!" will appear during
loading, and "Completed!" will appear briefly
when the load operation has finished.
memory card — the corresponding internal
SY55 data will be erased and completely re-
placed by the loaded data.
JOB 1 6
JOB 17