Yamaha SY55 Product Manual page 47

Hide thumbs Also See for SY55:
Table of Contents

Advertisement

44
15. Set the EF Balance (Effect Balance) for EL1 and EL2 as follows:
EL1 (Chorus) .........50
EL2 (Styroll) .........60
16. Select job 13: Amplitude EG ("REFERENCE" section, page 64), skipping
the OSC Frq.Mode ("REFERENCE" section, page 63) display.
17. Here we program the amplitude envelope generators for EL1 and EL2 —
and learn a new element selection technique.
Element Selection: If you press and hold the [SELECT] key the element
selection and switching display will appear.
On the upper display line "FL1" indicates that Filter 1 is selected and
"EL1" indicates that Element 1 is selected. The lower display line indi-
cates that the 2-element mode has been selected (elements 1 and 2 are
active). The asterisks ( * ) indicate elements that are not available (3 and
4 in this case).
While the [SELECT] key is held, any of the available elements can be
selected by pressing the corresponding [EL SEL] key (note the green
markings next to the numeric [7], [4], [1] and [0] keys).
Also while the [SELECT] key is pressed, any of the available elements
can also be turned ON or OFF (usually to hear how a single element in a
multiple-element voice sounds) by pressing the corresponding [EL ON/
OFF] key (the numeric [8], [5], [2] and [-] keys). An available element that
has been turned OFF in this manner appears as a "-" on the display.
Releasing the [SELECT] key returns the display to the current job.
You know how to select elements, select parameters using the
keys, and change values using the [DATA ENTRY] control or [-1/NO]
and [+1/YES] keys, so go ahead and program the various amplitude enve-
lope generator parameters for each element as follows:
Hint: The arrow symbols (
display mean that more parameters can be accessed by moving the cursor
in the indicated direction using the
18. Use the [PAGE
referring to the VeloChorus Voice Chart on the previous page, checking
all parameters and making adjustments when necessary.
and
) that appear at either end of the
and
key to step through the next eieht jobs yourself while
keys.
and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents