Yamaha SY55 Product Manual page 19

Selecting the VOICE
PLAY Mode, a Voice
Bank, and Voice
1 6
1. If the VOICE PLAY mode is not already selected — as indicated by a lit
[VOICE] key LED and "VOICE PLAY" across the top of the LCD — press
the [VOICE] key to select it.
2. The [INTERNAL], [CARD] and [PRESET] keys are used to select the desired
voice bank. If no memory card is inserted in the DATA slot, pressing the
[CARD] key has no effect.
If a 2-bank memory card such as an MCD64 is inserted into the DATA
slot and both banks of the card are properly formatted ("REFERENCE"
section, page 138), pressing the [CARD] key alternately selects bank 1 (in-
dicated by "C" on the display) or bank 2 ("C" on the display).
3. The [-1/NO] and [+1/YES] keys can be used to select the desired voice
within the current bank. Holding the [-1/NO] and [+1/YES] causes continu-
ous scrolling in the specified direction.
Any voice can also be directly selected by inputting its number via the
numeric keys and then pressing [ENTER]. The entered number will flash
on the display until the [ENTER] key is pressed, indicating that a new
voice number has been selected but the voice has not yet been recalled.