Table of Contents
Advertisement
Our company network supports you worldwide with offices in Germany, Austria,
Switzerland, Great Britain and the USA. For more information please contact:
FORTEC Elektronik AG
Hauptniederlassung
Lechwiesenstr. 9
86899 Landsberg am Lech
Telefon:
+49 (0) 8191 91172-0
Telefax:
+49 (0) 8191 21770
E-Mail:
sales@fortecag.de
Internet:
www.fortecag.de
FORTEC Elektronik AG
Büro Wien
Nuschinggasse 12
A-1230 Wien
Telefon:
+43 1 8673492-0
Telefax:
+43 1 8673492-26
E-Mail:
office@fortec.at
Internet:
www.fortec.at
The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
Manual
MIO-5251
Advantech
FORTEC Elektronik AG
Büro West
Hohenstaufenring 55
50674 Köln
Telefon:
Telefax:
E-Mail:
Internet:
ALTRAC AG
(Tochter der FORTEC):
Bahnhofstraße 3
CH-5436 Würenlos
Telefon:
Telefax:
E-Mail:
Internet:
+49 (0) 221 272 273-0
+49 (0) 221 272 273-10
west@fortecag.de
www.fortecag.de
+41 (0) 44 7446111
+41 (0) 44 7446161
info@altrac.ch
www.altrac.ch
Advertisement
Table of Contents
Related Manuals for Advantech MIO-5251
Summary of Contents for Advantech MIO-5251
- Page 1 Manual MIO-5251 Advantech Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln...
- Page 2 User Manual MIO-5251 ® ® ™ Intel Celeron J1900 & Atom E3825, 3.5" MI/O-Compact SBC, DDR3L, VGA, HDMI/DP, 48-bit LVDS/eDP, 2GbE, Mini PCIe, mSATA/SD card, iManager, MIOe...
- Page 3 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
- Page 4 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
-
Page 5: Declaration Of Conformity
Discard used batteries according to the manufacturer's instruc- tions. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –... -
Page 6: Packing List
Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 x MIO-5251 SBC 1 x SATA Cable 30cm (p/n: 1700006291) 1 x SATA Power Cable 35cm (p/n: 1700018785) ... - Page 7 MIO-5251 User Manual...
- Page 8 Electrical Specifications ..............4 1.2.5 Environmental ................4 Block Diagram................... 5 Board layout: dimensions................5 Figure 1.1 MIO-5251 Mechanical Drawing (Top Side) ....5 Figure 1.2 MIO-5251 Mechanical Drawing (Bottom Side) ... 6 Figure 1.3 MIO-5251 Mechanical Drawing (Coastline)....6 Chapter Installation..........7 Jumpers &...
- Page 9 1st MB Memory Map................64 Table B.2: 1st MB Memory Map ..........64 Interrupt Assignments ................65 Table B.3: Interrupt assignments..........65 Appendix C EC Watchdog Timer Sample Code .. 67 EC Watchdog Timer sample code ............68 MIO-5251 User Manual viii...
-
Page 10: Chapter 1 General Information
Chapter General Information This chapter gives background information on the MIO-5251. Sections include: Introduction Specifications Block diagram Board layout and dimensions... -
Page 11: Introduction
Introduction MIO-5251 is designed using MI/O Extension form factor (compact series, 146 x 102 ® ® mm) and powered by the latest generation of Intel Celeron J1900 and Atom™ E3825 processors which have low power features but also good performance com- puting, especially for multimedia capabilities compared to earlier generations. - Page 12 Mini PCIe / mSATA 1 Full-size Mini PCIe with SIM holder (with PCIe and USB interface) 1 Full-size mSATA (with SATA and USB interface) Power supply: 1.1 A @ 3.3 V, 0.375 A @ 1.5 V MIO-5251 User Manual...
-
Page 13: Os Support
UEFI is needed, that can be done by T-P/N 1.2.2 OS support MIO-5251 supports Win8, Win7, WES8, WES7, WEC7, Linux kernel 3.x, VxWorks 6.9.3.3, Android Kit Kat 4.4 Win7 only supports Legacy mode and Win8 for UEFI mode. -
Page 14: Block Diagram
Block Diagram Board layout: dimensions 98.70 97.05 92.70 70.10 86.70 60.13 51.67 27.20 27.73 20.50 11.06 8.37 Figure 1.1 MIO-5251 Mechanical Drawing (Top Side) MIO-5251 User Manual... -
Page 15: Figure 1.2 Mio-5251 Mechanical Drawing (Bottom Side)
84.03 85.94 2-M2-NUT 68.51 51.63 49.68 Figure 1.2 MIO-5251 Mechanical Drawing (Bottom Side) 156.14 Figure 1.3 MIO-5251 Mechanical Drawing (Coastline) MIO-5251 User Manual... -
Page 16: Chapter 2 Installation
Chapter Installation This chapter explains the setup procedures of the MIO-5251 hard- ware, including instructions on setting jumpers and connecting peripherals, switches and indica- tors. Be sure to read all safety pre- cautions before you begin the installation procedure. -
Page 17: Jumpers & Switches
Jumpers & Switches The MIO-5251 has a number of jumpers that allow you to configure your system to suit your application. The table below lists the functions of the various jumpers. Table 2.1: Jumpers & Switches Auto Power On LCD Power... -
Page 18: Locating Connectors
Locating Connectors Figure 2.1 MIO-5251 Connector Locations (Top Side) Figure 2.2 MIO-5251 Connector Locations (Bottom Side) MIO-5251 User Manual... -
Page 19: Setting Jumpers
Table 2.3: Auto Power On Setting (J2) Setting Function (Open) Power Button for Power On Auto Power On (Close)* * Default 2.4.2 LCD Power (J5) Table 2.4: LCD Power (J5) Setting Function (1-3)* +3.3V (3-5) (3-4) +12V MIO-5251 User Manual... -
Page 20: Clear Cmos (Sw2)
2.4.3 Clear CMOS (SW2) Table 2.5: Clear CMOS (SW2) Setting Function (1)* Normal Clear CMOS MIO-5251 User Manual... - Page 21 MIO-5251 User Manual...
-
Page 22: Chapter 3 Ami Bios Setup
Chapter AMI BIOS Setup... - Page 23 AMIBIOS has been integrated into a plethora of motherboards for decades. With the AMIBIOS Setup program, you can modify BIOS settings and control the various sys- tem features. This chapter describes the basic navigation of the MIO-5251 BIOS setup screens.
-
Page 24: Entering Setup
BIOS supports your CPU. If there is no number assigned to the patch code, please contact an Advantech application engineer to obtain an up-to-date patch code file. This will ensure that your CPU‘s system status is valid. -
Page 25: Advanced Bios Features Setup
3.1.2 Advanced BIOS Features Setup Select the Advanced tab from the MIO-5251 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>... - Page 26 OS. ACPI Sleep State Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. Lock Legacy Resources Enables or Disables Lock of Legacy Resources MIO-5251 User Manual...
- Page 27 Set Parameters of Serial Port 1 (COMA). Serial Port 2 Configuration Set Parameters of Serial Port 2 (COMB). Serial Port 3 Configuration Set Parameters of Serial Port 3 (COMC). Serial Port 4 Configuration Set Parameters of Serial Port 4 (COMD). MIO-5251 User Manual...
- Page 28 This item allows users to set backlight mode. EC Power Saving Mode This item allows users to set board’s power saving mode when off. EC Watch Dog Function This item allows users to select EC watchdog timer. MIO-5251 User Manual...
- Page 29 3.1.2.4 S5 RTC Wake Settings Wake system from S5 Enable or disable System wake on alarm event. Select FixedTime, system will wake on the hr::min::sec specified. MIO-5251 User Manual...
- Page 30 Serial Port Console Redirection Console Redirection This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Services (EMS). Console Redirection This item allows users to configuration console redirection detail settings. MIO-5251 User Manual...
- Page 31 Adjacent Cache Line Prefetch Enable the mid level cache(L2) prefetching of adjacent cache lines. Intel Virtualization Technology When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Power Technology Enable the power management features. MIO-5251 User Manual...
- Page 32 3.1.2.7 PPM Configuration CPU C state Report Enable/Disable CPU C state report to OS. Max CPU C-state This option controls Max C state that the processor will support. S0ix Enable/Disable CPU S0ix state. MIO-5251 User Manual...
- Page 33 SATA Mode Select IDE / AHCI. Serial-ATA Port 0 / Port1 Enable / Disable Serial ATA Port0 / Port1. SATA Port 0 / Port1 HotPlug Enable / Disable SATA Port0 / Port1 hotplug function. MIO-5251 User Manual...
- Page 34 Storage Controls the execution of UEFI and Legacy Storage OpROM. Video Controls the execution of UEFI and Legacy Video OpROM. Other PCI devices Determines OpROM execution policy for devices other than Network, Storage, or Video. MIO-5251 User Manual...
- Page 35 3.1.2.10 Trusted Computing Trusted Computing Enables or Disables BIOS support for security device. O.S. will not show Secu- rity Device. TCG EFI protocol and INT1A interface will not be available. MIO-5251 User Manual...
- Page 36 Maximum time the device will take before it properly reports itself to the Host Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor. MIO-5251 User Manual...
- Page 37 3.1.2.12 Security Configuration TXE HMRFPO Disable TXE Firmware Update TXE EOP Message Send EOP Message Before Enter OS TXE Unconfiguration Perform Revert TXE settings to factory defaults MIO-5251 User Manual...
-
Page 38: Chipset Configuration
3.1.3 Chipset Configuration North Bridge Details for North Bridge items. South Bridge Details for South Bridge items. MIO-5251 User Manual... - Page 39 3.1.3.1 North Bridge Intel IGD Configuration Config Intel IGD Settings. Max TOLUD Maximum Value of TOLUD. MIO-5251 User Manual...
- Page 40 Select DVMT 5.0 Total Graphic Memory size used by the Internal Graphics Device. Aperture Size Select the Aperture Size. DOP CG Enable/Disable DOP clock gating. GTT Size Select the GTT Size IGD Thermal Enable/Disable IGD Thermal. Spread Spectrum clock Enable/Disable Spread Spectrum clock. MIO-5251 User Manual...
- Page 41 Select AC power state when power is re-applied after a power failure. Serial IRQ Mode Configure Serial IRQ Mode. Global SMI Lock Enable or Disable SMI lock. BIOS Read/Write Protection Enable or Disable BIOS SPI region read/write protect. MIO-5251 User Manual...
- Page 42 Enabled = Azalia will be unconditionally Enabled. Auto = Azalia will be enabled if present disabled otherwise. Azalia HDMI Codec Enable/Disable internal HDMI codec for Azalia HDMI Port B Enable/Disable HDMI Port B HDMI Port C Enable/Disable HDMI Port C MIO-5251 User Manual...
- Page 43 Control the USB EHCI (USB 2.0) functions. One EHCI controller must always be enabled. USB Per Port Control Control each of the USB ports (0~3). Enable: Enable USB per port; Disable: Use USB port X settings. MIO-5251 User Manual...
- Page 44 3.1.3.6 PCI Express Configuration PCI Express Port0 / Port2 Enable or Disable the PCI Express Port0 / Port 2 in the Chipset. Speed Configure PCIe Port Speed. MIO-5251 User Manual...
-
Page 45: Security
3.1.4 Security Select Security Setup from the MIO-5251 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press <Enter>:... -
Page 46: Boot
This means the default boot selec- tion is not automatically started by the firmware. Bootup NumLock State Select the keyboard NumLock state. Quiet Boot Enables or disables Quiet Boot option. Boot Option #1 Sets the system boot order. MIO-5251 User Manual... -
Page 47: Save & Exit
This item allows you to save the changes done so far as user defaults. Restore User Defaults This item allows you to restore the user defaults to all the options. Boot Override Boot device select can override your boot priority. MIO-5251 User Manual... -
Page 48: Chapter 4 Mioe Installation
Chapter MIOe Installation... -
Page 49: Quick Installation Guide
Remove Release Paper PAD XR-Pe 13.9x13.9x1mm There are six screws and six studs inside the white box, please install the heat- sink into place as per illustration below: MIO-5251 User Manual... - Page 50 Appendix Pin Assignments This appendix contains informa- tion of a detailed or specialized nature. Sections include: Jumper and Connector Tables...
-
Page 51: A.1 Jumper List
Auto Power On LCD Power Part Number 1653003260 HD_3x2P_79 Footprint PIN HEADER 3x2P 2.0mm 180D(M) SMD 21N22050 Description Setting Function (1-3)* +3.3V (3-5) (3-4) +12V Clear CMOS Part Number 1600000071 SW_3P_CJS-1201TA1 Footprint CJS-1201TA1 Description Pin Name RTC_TEST# MIO-5251 User Manual... -
Page 52: A.2 Connector Pin Definition
WF_2x2P_165_BOX_RA_D_740SP ATX PWRCONN 2x2P 4.2mm 90D(M) DIP 740-77-04TS50 Description Pin Name +12V +12V SD Card Part Number 1654010952-01 SDCARD_15P_SDC5-15M1-KNM0-0 Footprint SD Card 15P SMD G/F SDC5-15M1-KNM0-01 Description Pin Name DAT3 VSS1 VSS2 DAT0 DAT1 DAT2 SD3_CD# SD3_WP MIO-5251 User Manual... - Page 53 DDR3 SODIMM H=9.2mm 204P SMD AS0A626-HASN-7H Description Power Switch 1655302020 Part Number WF_2P_79_BOX_R1_D Footprint WAFER BOX 2P 2.0mm 180D(M) DIP A2001WV2-2P Description Pin Name PSIN Reset 1655302020 Part Number WF_2P_79_BOX_R1_D Footprint WAFER BOX 2P 2.0mm 180D(M) DIP A2001WV2-2P Description Pin Name RESET# MIO-5251 User Manual...
- Page 54 BOX HEADER 5x2P 2.00mm 180D(M) SMD 23N685B-10M10 Description Pin Name GPIO4 GPIO0 GPIO5 GPIO1 GPIO6 GPIO2 GPIO7 GPIO3 CN11 Part Number 1654000055 DBVGA-VF5MS Footprint D-SUB Conn. 15P 90D(F) DIP 070242FR015S200ZU Description Pin Name GREEN BLUE DDAT HSYNC VSYNC DCLK MIO-5251 User Manual...
- Page 55 ML_Lane1(p)/TMDS Data1+ GND/TMDS Data1 Shield ML_Lane1(n)/TMDS Data1– ML_Lane2(p)/TMDS Data0+ GND/TMDS Data0 Shield ML_Lane2(n)/TMDS Data0– ML_Lane3(p)/TMDS Clock+ GND/TMDS Clock Shield ML_Lane3(n)/TMDS Clock– CONFIG1/Reserved CONFIG2/Reserved AUX CH(p)/SCL GND/SDA AUX CH(n)/DDC Ground Hot Plug Detect/+5V Power GND/Hot Plug Detect +3.3V MIO-5251 User Manual...
- Page 56 CN13 SATA Power 1655001154 Part Number Footprint WF_4P_98_BOX_R1_D WAFER BOX 4P 2.50mm 180D(M) DIP 24W1170-04S10-01 Description Pin Name +12V CN14 SATA 1654007578 Part Number Footprint SATA_7P_WATF-07DBN6SB1U Serial ATA 7P 1.27mm 180D(M) SMD WATF-07DBN6SB1U Description Pin Name MIO-5251 User Manual...
- Page 57 MINI PCI E 52P 6.8mm 90D SMD AS0B226-S68Q-7H Description Pin Name WAKE# +3.3VSB +1.5V UIM_PWR UIM_DATA REFCLK- UIM_CLK REFCLK+ UIM_RESET UIM_VPP W_DISABLE# PERST# PERn0 +3.3VSB PERp0 +1.5V SMB_CLK PETn0 SMB_DAT PETp0 USB D- USB D+ +3.3VSB +3.3VSB MIO-5251 User Manual...
- Page 58 +1.5V +3.3VSB CN16 mSATA 1654002538 Part Number Footprint FOX_AS0B226-S68K7F MINI PCI E 52P 6.8mm 90D SMD AS0B226-S68Q-7H Description Pin Name +3.3V +1.5V +3.3V MIO-5251 User Manual...
- Page 59 +1.5V SMB_CLK SMB_DAT USB D- USB D+ +3.3V +3.3V +1.5V +3.3V MIO-5251 User Manual...
- Page 60 Part Number Footprint SIM_6P_5210622-SINR03 SIM card conn. 6p 2.54mm 90D(F) SMD 5210622-SINR Description Pin Name UIM_PWR UIM_RESET UIM_CLK UIM_VPP UIM_DATA CN18 External USB 1654009513 Part Number USB_8P_UB1112C-8FDE-4F Footprint USB CONN. 8P 2.0mm 90D DIP UB1112C-8FDE-4F Description Pin Name MIO-5251 User Manual...
- Page 61 CN19 External USB2.0+USB3.0 1654010199 Part Number Footprint USB_13P_UEA1112C-UHS6-4F USB Conn. 2.0+3.0 13P 90D(F) DIP UEA1112C-UHS6-4 Description Pin Name SSRX- SSRX+ SSTX- SSTX+ MIO-5251 User Manual...
- Page 62 CN20 COM1/COM2 1653004793 Part Number Footprint HD_10x2P_79_23N685B-20M10 BOX HEADER 10x2P 2.0mm 180D(M)SMD 23N685B-20M10B Description Pin Name DCD1# DSR1# RXD1 RTS1# TXD1 CTS1# DTR1# RI1# DCD2# DSR2# RXD2 RTS2# TXD2 CTS2# DTR2# RI2# MIO-5251 User Manual...
- Page 63 CN21 COM3/COM4 1653004793 Part Number Footprint HD_10x2P_79_23N685B-20M10 BOX HEADER 10x2P 2.0mm 180D(M)SMD 23N685B-20M10B Description Pin Name 422TX3-/485D3-/DCD3# DSR3# 422TX3+/485D3+/RXD3 RTS3# 422RX3+/TXD3 CTS3# 422RX3-/DTR3# RI3# 422TX4-/485D4-/DCD4# DSR4# 422TX4+/485D4+/RXD4 RTS4# 422RX4+/TXD4 CTS4# 422RX4-/DTR4# RI4# MIO-5251 User Manual...
- Page 64 PHONE JACK RJ45 28P DIP RTB-19GB9J1A Description Pin Name TX+(10/100),BI_DA+(GHz) TX-(10/100),BI_DA-(GHz) RX+(10/100),BI_DB+(GHz) BI_DC+(GHz) BI_DC-(GHz) RX-(10/100),BI_DB-(GHz) BI_DD+(GHz) BI_DD-(GHz) CN27 Audio 1653004099 Part Number HD_5x2P_79_23N685B-10M10 Footprint Description BOX HEADER 5x2P 2.00mm 180D(M) SMD 23N685B-10M10 Pin Name LOUTR LINR LOUTL LINL MIC1R MIC1L MIO-5251 User Manual...
- Page 65 MIOE_CPUSIDE B/B Conn. 40x2P 0.8mm 180D(F) SMD QSE-040-01-L-D Description Pin Name PCIE_RX0+ PCIE_TX0+ PCIE_RX0- PCIE_TX0- PCIE_RX1+ PCIE_TX1+ PCIE_RX1- PCIE_TX1- PCIE_RX2+ PCIE_TX2+ PCIE_RX2- PCIE_TX2- PCIE_RX3+ PCIE_TX3+ PCIE_RX3- PCIE_TX3- PCIE_CLK+ LOUTL PCIE_CLK- LOUTR AGND SMB_CLK SMB_DAT PCIE_WAKE# RESET# SLP_S3# MIO-5251 User Manual...
- Page 66 CLK33M LPC_AD0 DDP_HPD LPC_AD1 LPC_AD2 DDP_AUX+ LPC_AD3 DDP_AUX- LPC_DRQ#0 LPC_SERIRQ DDP_D0+ LPC_FRAME# DDP_D0- USB0_D+ DDP_D1+ USB0_D- DDP_D1- USB1_D+/USB_SSTX+ DDP_D2+ USB1_D-/USB_SSTX- DDP_D2- USB2_D+/USB_SSRX+ DDP_D3+ USB2_D-/USB_SSRX- DDP_D3- USB_OC# +12VSB +12VSB +5VSB +5VSB +5VSB +5VSB MIO-5251 User Manual...
- Page 67 CN31 LVDS 1653920200 Part Number SPH20X2 Footprint Description B/B Conn. 40P 1.25mm 90D SMD DF13-40DP-1.25V(91) Pin Name +5V or +3.3V +5V or +3.3V +5V or +3.3V +5V or +3.3V LVDS0_D0- LVDS1_D0- LVDS0_D0+ LVDS1_D0+ LVDS0_D1- LVDS1_D1- LVDS0_D1+ LVDS1_D1+ MIO-5251 User Manual...
- Page 68 LVDS0_D2- LVDS1_D2- LVDS0_D2+ LVDS1_D2+ LVDS0_CLK- LVDS1_CLK- LVDS0_CLK+ LVDS1_CLK+ LVDS0_D3- LVDS1_D3- LVDS0_D3+ LVDS1_D3+ MIO-5251 User Manual...
- Page 69 CN32 1653910261 Part Number Footprint SPH10X2 B/B Conn 10x2P 1.25mm 180D(M)SMD DF13-20DP-1.25V Description Pin Name AUX- AUX+ Hot Plug Detect +5V or +3.3V +5V or +3.3V MIO-5251 User Manual...
- Page 70 1655904020 Part Number FPC4V-125M Footprint WAFER 4P 1.25mm 180D(M) SMD 85205-04001 Description Pin Name SMB_DAT SMB_CLK CN34 Internal USB 1653003718 Part Number HD_5x2P_79_RA_N10_21N22050 Footprint PIN HEADER 5x2P 2.00mm 90D(M) SMD 21N22050 Description Pin Name +V5SB_USB_UTC USB6_HUB1_z_P- USB6_HUB1_z_P+ MIO-5251 User Manual...
- Page 71 FAN1 System Fan 1655003010 Part Number Footprint WHP3VA Wafer 2.54mm 3P 180D(M) DIP 22-27-2031 Description Pin Name +V12 MIO-5251 User Manual...
-
Page 72: System Assignments
Appendix System Assignments This appendix contains informa- tion of a detailed nature. Sections include: System I/O Ports 1st MB Memory Map Interrupt Assignments... -
Page 73: System I/O Ports
Addr. Range (Hex) Device A0000h - BFFFFh Intel® HD Graphics A0000h - BFFFFh PCI Bus C0000h - DFFFFh PCI Bus E0000h - FFFFFh PCI Bus 90400000 – 905FFFFF Intel® Trusted Execution Engine Interface E0000000 - FEFFFFFF System resources MIO-5251 User Manual... -
Page 74: Interrupt Assignments
Communications Port (COM4) / iManager WatchDog IRQ IRQ6 Available IRQ7 Communications Port (COM3) IRQ8 Internal RTC or HPET IRQ9 Microsoft ACPI-Compliant System IRQ10 Available IRQ11 Available IRQ12 Available IRQ13 Numeric data processor IRQ14 SATA controller IRQ15 SATA controller MIO-5251 User Manual... - Page 75 MIO-5251 User Manual...
- Page 76 Appendix EC Watchdog Timer Sample Code...
-
Page 77: Ec Watchdog Timer Sample Code
EC_Data_Port mov al, 57h ; Watch dog event flag. out dx,al mov dx, EC_Data_Port mov al, 04h ; Reset event. out dx,al mov dx, EC_Command_Port mov al,28h ; start WDT function. out dx,al .exit MIO-5251 User Manual... - Page 78 Appendix C EC Watchdog Timer Sample Code...
- Page 79 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 201...
- Page 80 Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln Telefon: +49 (0) 8191 91172-0 Telefon:...
Need help?
Do you have a question about the MIO-5251 and is the answer not in the manual?
Questions and answers