Quick Access To The Handset's Device Information; Led Indications - ASCOM i62 Configuration Manual
Vowifi handset
Hide thumbs
Also See for i62:
- Troubleshooting manual (80 pages) ,
- User manual (75 pages) ,
- Quick reference manual (23 pages)
Table of Contents
Advertisement
Configuration Manual
Ascom i62 VoWiFi Handset
Other menus are described in User Manual, Ascom i62 VoWiFi Handset, TD 92599EN.
9.2
Quick Access to the Handset's Device Information
For quick access to device information, short codes can be used from the idle menu. To
display this information, enter the following codes in the handset.
Information
Software version
Hardware version
IP address
Subnet mask
Default gateway
MAC address
Current BSSID
Current ESSID
Current RSSI
Current channel
Site survey functions
NOTE: Other settings and information can be found on the internal web administration page,
refer to chapter
9.3
LED indications
The following table shows the LED indications that are used for the handset.
LED indication
None
Green, fixed
Green, flashing, slow
Orange, fixed
Orange, flashing
Red, fixed
Red, flashing
Red, flashing, slow:
20 June 2012 / Ver. E
9. Administration
Code
*#34# > Software
*#34# > Hardware
*#34# > Network info
*#34# > Network info
*#34# > Network info
*#34# > Hardware
*#76#
*#76# or *#34#
*#76#
*#76#
*#77#
8. Handset Internal Web Administration Page
Description
Switched off.
Handset fully charged and in charger.
Switched on, but not in charger.
Charging
Low battery
Software error. Service needed.
Very low battery
No network connection.
TD 92675EN
on page 61.
64
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the i62 and is the answer not in the manual?
Questions and answers
no access solving
To solve access issues with the Ascom i62, follow these steps:
1. Login to the Device:
- Enter the phone's IP address in the browser.
- Click the login link in the top right corner.
- Enter the username “admin” and password “changeme”.
- Click OK.
2. Check Logs and Errors:
- Navigate to the Troubleshoot tab.
- Review the Syslog for real-time handset actions.
- Check the Errorlog for stored errors and download it if needed.
3. Review WLAN and Voice Statistics:
- Open the Statistics tab to check call and WLAN connectivity details.
4. Wi-Fi Configuration Adjustments:
- Ensure consistent transmission power across all APs.
- Avoid large power variations set by ARM.
- Match AP channels with the i62 configuration.
- If connectivity is intermittent, test with one AP first, then expand.
5. SSID Profile Optimization:
- Use a clean SSID profile and apply optimizations step by step.
- Observe behavior after each change to identify potential issues.
If the issue persists, provide logs to Ascom support for further analysis.
This answer is automatically generated