Hide Missed Call Window; Battery Warning; Shared Phone - ASCOM i62 Configuration Manual
Vowifi handset
Hide thumbs
Also See for i62:
- Troubleshooting manual (80 pages) ,
- User manual (75 pages) ,
- Quick reference manual (23 pages)
Table of Contents
Advertisement
Configuration Manual
Ascom i62 VoWiFi Handset
3
The following settings for the profile can configured:
• Profile name
• Internal/External/Callback ring signal
• Ring volume
• Vibrator
• Key sound
• Message alert signal
• Answering settings
• Diversion settings
Diversions
Calls can be diverted to other phone numbers, for example when busy.
1
In the applicable profile, select Diversions.
2
Activate a diversion by selecting "Enable" in the applicable diversion drop-down lists.
The following diversions are possible:
• Activate diversions for all calls
• Activate diversions on user busy
• Activate no answer diversions
3
Enter the diversion number in the applicable diversion number text field.
4
If the handset is configured to access the PBX via SIP protocol, the handset can be
configured to manage the diversion locally instead of using the PBX. Requires that
the handset is within the coverage area and is switched on.
Select VoIP > SIP. In the Call forward locally drop-down list, select "Enable".
6.5.7
Hide Missed Call Window
A missed call is by default indicated by a Missed call window. It is possible to hide this
window, for example, if both a handset and a mobile is used. If the user answers the call
using the mobile, the Missed call window will not be displayed in the handset.
1
Select Device > Call.
2
In the Show missed calls popup drop-down list, select "No" to hide the Missed call
window.
6.5.8
Battery Warning
1
Select Device > Settings
2
In the Battery warning drop-down list, select one of the following:
• Sound repeatedly
• Sound once
• Sound off
6.5.9
Shared Phone
1. Applicable to Messenger and Protector only.
20 June 2012 / Ver. E
6. Handset Configuration
1
TD 92675EN
39
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the i62 and is the answer not in the manual?
Questions and answers
no access solving
To solve access issues with the Ascom i62, follow these steps:
1. Login to the Device:
- Enter the phone's IP address in the browser.
- Click the login link in the top right corner.
- Enter the username “admin” and password “changeme”.
- Click OK.
2. Check Logs and Errors:
- Navigate to the Troubleshoot tab.
- Review the Syslog for real-time handset actions.
- Check the Errorlog for stored errors and download it if needed.
3. Review WLAN and Voice Statistics:
- Open the Statistics tab to check call and WLAN connectivity details.
4. Wi-Fi Configuration Adjustments:
- Ensure consistent transmission power across all APs.
- Avoid large power variations set by ARM.
- Match AP channels with the i62 configuration.
- If connectivity is intermittent, test with one AP first, then expand.
5. SSID Profile Optimization:
- Use a clean SSID profile and apply optimizations step by step.
- Observe behavior after each change to identify potential issues.
If the issue persists, provide logs to Ascom support for further analysis.
This answer is automatically generated