In Charger Behavior; Configure Profiles - ASCOM i62 Configuration Manual
Vowifi handset
Hide thumbs
Also See for i62:
- Troubleshooting manual (80 pages) ,
- User manual (75 pages) ,
- Quick reference manual (23 pages)
Table of Contents
Advertisement
Configuration Manual
Ascom i62 VoWiFi Handset
6.5.5
In Charger Behavior
The handset behavior when placed in a charger can be configured.
In charger call behavior
1
Select Device > Call.
2
Choose a setting from the In charger call behavior list:
• No action
• End – the handset will end an ongoing call when placed in a charger.
• Put on Loudspeaker – the handset will turn on the loudspeaker when placed in a
charger during a call.
In charger action
1
Select Device > Settings.
2
In the In charger action drop-down list, select one of the following:
• No action - no action will be performed when handset is placed in charger
• Switch off - the handset will be switched off when placed in charger
• Sound off - the handset will be silenced when placed in charger.
• Change profile the handset will change profile when placed in charger.
- In the Change profile in charger drop-down list, select the profile to be used.
- If needed, configure the selected profile, see
Clear lists in charger
1
Select Device > General.
2
In the Clear lists in charger drop-down list, select one of the following:
• On - message lists and call lists will be deleted when handset placed in charger
• Off - no action will be performed when handset placed in charger.
6.5.6
Configure Profiles
It is possible to set up an own profile for incoming calls, message alerts, vibrating alerts, key
sound etc. This can be useful when there are many users on the same handset, and they
want different sound profiles. It can also be used for temporary settings, for example while
in a meeting, incoming calls should be silent.
Profiles are configured via parameters in the "Profiles" folder.
1
Select "Profiles".
2
Select "Normal" or "Profile X" (where X represents 1- 4)
20 June 2012 / Ver. E
6. Handset Configuration
TD 92675EN
6.5.6 Configure
Profiles.
38
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the i62 and is the answer not in the manual?
Questions and answers
no access solving
To solve access issues with the Ascom i62, follow these steps:
1. Login to the Device:
- Enter the phone's IP address in the browser.
- Click the login link in the top right corner.
- Enter the username “admin” and password “changeme”.
- Click OK.
2. Check Logs and Errors:
- Navigate to the Troubleshoot tab.
- Review the Syslog for real-time handset actions.
- Check the Errorlog for stored errors and download it if needed.
3. Review WLAN and Voice Statistics:
- Open the Statistics tab to check call and WLAN connectivity details.
4. Wi-Fi Configuration Adjustments:
- Ensure consistent transmission power across all APs.
- Avoid large power variations set by ARM.
- Match AP channels with the i62 configuration.
- If connectivity is intermittent, test with one AP first, then expand.
5. SSID Profile Optimization:
- Use a clean SSID profile and apply optimizations step by step.
- Observe behavior after each change to identify potential issues.
If the issue persists, provide logs to Ascom support for further analysis.
This answer is automatically generated