Services; Push-To-Talk (Ptt) Group Call - ASCOM i62 Configuration Manual
Vowifi handset
Hide thumbs
Also See for i62:
- Troubleshooting manual (80 pages) ,
- User manual (75 pages) ,
- Quick reference manual (23 pages)
Table of Contents
Advertisement
Configuration Manual
Ascom i62 VoWiFi Handset
2
Select "Hide", "Show", or "Read only" for the applicable menu item in the drop-down
list. If "Read only" is selected, the menu item will be visible in the handset, but cannot
be edited by the user. The following items can be hidden:
• Connections (Network, Headset etc.)
• Calls
• Contacts
• Short cuts (Soft keys, Hot keys etc.)
• Messaging
• Services
• Profiles
• Settings (Sounds, Display, Language etc.)
6.12.2 Services
NOTE: Applicable to Messenger and Protector only.
It is possible to configure up to ten services that can be accessed from the handset's
Services menu.
1
Select "Services".
2
Select between 1 - 10.
3
In the Service name, enter the name of the service to be displayed in the handset's
Service menu.
4
Select the service to be used:
• Phone Call
• Send a message to predefined number (prompt for the message text)
• Send data to message service centre (predefined data and/or prompt for the
data)
• Edit alarm data
• PTT
5
In the Service user data field, enter the data to be sent/dialed when using the service.
NOTE: This field is not applicable for PTT.
6
In the Service prefix for user data field, enter the prefix for the service user data (if
needed).
7
In the Service index field, enter the corresponding index used for PTT. For example, if
PTT group 1 is configured (located under Push-To-Talk > 1), the service index must
be set to 1.
NOTE: This field is only applicable for PTT.
If the PTT is not configured, continue, with
Tip: It is also possible to configure soft keys to reach services quickly, see
on page 41.
6.13 Push-To-Talk (PTT) Group Call
To be able to configure a PTT session, the following must be known:
20 June 2012 / Ver. E
6. Handset Configuration
6.13 Push-To-Talk (PTT) Group
TD 92675EN
Call.
6.5.13 Short cuts
56
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the i62 and is the answer not in the manual?
Questions and answers
no access solving
To solve access issues with the Ascom i62, follow these steps:
1. Login to the Device:
- Enter the phone's IP address in the browser.
- Click the login link in the top right corner.
- Enter the username “admin” and password “changeme”.
- Click OK.
2. Check Logs and Errors:
- Navigate to the Troubleshoot tab.
- Review the Syslog for real-time handset actions.
- Check the Errorlog for stored errors and download it if needed.
3. Review WLAN and Voice Statistics:
- Open the Statistics tab to check call and WLAN connectivity details.
4. Wi-Fi Configuration Adjustments:
- Ensure consistent transmission power across all APs.
- Avoid large power variations set by ARM.
- Match AP channels with the i62 configuration.
- If connectivity is intermittent, test with one AP first, then expand.
5. SSID Profile Optimization:
- Use a clean SSID profile and apply optimizations step by step.
- Observe behavior after each change to identify potential issues.
If the issue persists, provide logs to Ascom support for further analysis.
This answer is automatically generated