Message Centre Number; Max Number Of Call Completions; Dial Pause Time; Direct Off Hook From Charger - ASCOM i62 Configuration Manual
Vowifi handset
Hide thumbs
Also See for i62:
- Troubleshooting manual (80 pages) ,
- User manual (75 pages) ,
- Quick reference manual (23 pages)
Table of Contents
Advertisement
Configuration Manual
Ascom i62 VoWiFi Handset
6.9.8
Message Centre Number
Specifies the number to the server for Message Waiting Indication (MWI) if included in the
system.
1
Select Device > Message centre.
2
In the Message Centre number field, enter the number to the server.
3
In the Voice mail call clears MWI drop-down list, select "Enable" to clear MWI in the
message centre when calling the defined voice mail number.
6.9.9
Max number of Call Completions
Specifies the maximum number of call back requests the handset can handle.
1
Select Device > Call.
2
In the Max number of call completions drop-down list, enter number of calls
6.9.10 Dial Pause Time
By adding a "P" to a phone number, a pause is added and will be activated when dialing. For
how long is defined here.
1
Select Device > Call.
2
In the Dial pause time field, enter a pause time between 1 - 3 seconds.
6.9.11 Direct off Hook from Charger
The handset will automatically answer a call (that is; quick answer) when removed from the
charger.
1
Select Device > General.
2
In the Direct off hook from charger drop-down list, select "Enable".
6.9.12 Replace Call Rejected with User Busy
Is used if the system does not support call rejected.
1
Select Device > General.
2
In the Replace Call Rejected with User Busy drop-down list, select "Enable".
6.9.13 Busy on 1 / Disable call waiting
The default behavior is to indicate "call waiting" to the user. It is possible to change this
behavior so that the next incoming call is rejected and a busy indication sent back to the SIP
proxy.
1
Select Device > Call.
2
In the Busy on 1 / Disable call waiting drop-down list, select "Yes".
6.9.14 Calling Line Restriction
The handset may be configured to hide the calling number and name to the called party.
1
Select Device > Call.
2
In the CLIR (Calling Line Information Restriction) drop-down list, select "On".
20 June 2012 / Ver. E
6. Handset Configuration
TD 92675EN
53
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the i62 and is the answer not in the manual?
Questions and answers
no access solving
To solve access issues with the Ascom i62, follow these steps:
1. Login to the Device:
- Enter the phone's IP address in the browser.
- Click the login link in the top right corner.
- Enter the username “admin” and password “changeme”.
- Click OK.
2. Check Logs and Errors:
- Navigate to the Troubleshoot tab.
- Review the Syslog for real-time handset actions.
- Check the Errorlog for stored errors and download it if needed.
3. Review WLAN and Voice Statistics:
- Open the Statistics tab to check call and WLAN connectivity details.
4. Wi-Fi Configuration Adjustments:
- Ensure consistent transmission power across all APs.
- Avoid large power variations set by ARM.
- Match AP channels with the i62 configuration.
- If connectivity is intermittent, test with one AP first, then expand.
5. SSID Profile Optimization:
- Use a clean SSID profile and apply optimizations step by step.
- Observe behavior after each change to identify potential issues.
If the issue persists, provide logs to Ascom support for further analysis.
This answer is automatically generated