Ip Address Settings; Automatic Ip Address Settings; Static Ip Address (Manual) Settings; Network Settings - ASCOM i62 Configuration Manual
Vowifi handset
Hide thumbs
Also See for i62:
- Troubleshooting manual (80 pages) ,
- User manual (75 pages) ,
- Quick reference manual (23 pages)
Table of Contents
Advertisement
Configuration Manual
Ascom i62 VoWiFi Handset
6.2
IP Address Settings
The IP address settings can be configured in two ways.
• The handset can configured to receive an IP address automatically from a DHCP server,
see
6.2.1 Automatic IP Address
• If no DHCP server is used, a unique IP address must be entered manually for each
handset, see
6.2.1
Automatic IP Address Settings
1
Select Network > Network A (or B, C, D).
2
In the DHCP mode drop-down list, select "Enable".
The Phone IP address, Subnet mask and Default gateway are automatically set up.
6.2.2
Static IP Address (Manual) Settings
1
Select Network > Network A (or B, C, D).
2
In the DHCP mode drop-down list, select "Disable (static mode)". Additional
parameters will be displayed.
3
In the Phone IP address field, enter the unique IP address for the handset.
4
In the Subnet mask field, enter the subnet mask.
5
In the Default gateway field, enter the IP address for the default gateway.
DNS Server Settings
It is possible to configure which DNS server the handset shall use. If the primary DNS server
is available, it is always used. Otherwise, the secondary DNS server will be used.
NOTE: The DNS parameters are only visible if the DHCP mode is set to "Disable (static
mode)", see
Primary DNS Server
1
Select Network > Network A (B, C, or D).
2
In the Primary DNS field, enter the IP address to the primary DNS server.
Secondary DNS Server
1
Select Network > Network A (B, C, or D).
2
In the Secondary DNS field, enter the IP address to the secondary DNS server.
6.3
Network Settings
6.3.1
SSID
The SSID is the name of the network the handset associates to.
1
Select Network > Network A (B, C, or D).
2
In the SSID field, enter system SSID.
Note that the SSID is case-sensitive.
20 June 2012 / Ver. E
6. Handset Configuration
Settings.
6.2.2 Static IP Address (Manual)
6.2.2 Static IP Address (Manual)
Settings.
Settings.
TD 92675EN
30
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the i62 and is the answer not in the manual?
Questions and answers
no access solving
To solve access issues with the Ascom i62, follow these steps:
1. Login to the Device:
- Enter the phone's IP address in the browser.
- Click the login link in the top right corner.
- Enter the username “admin” and password “changeme”.
- Click OK.
2. Check Logs and Errors:
- Navigate to the Troubleshoot tab.
- Review the Syslog for real-time handset actions.
- Check the Errorlog for stored errors and download it if needed.
3. Review WLAN and Voice Statistics:
- Open the Statistics tab to check call and WLAN connectivity details.
4. Wi-Fi Configuration Adjustments:
- Ensure consistent transmission power across all APs.
- Avoid large power variations set by ARM.
- Match AP channels with the i62 configuration.
- If connectivity is intermittent, test with one AP first, then expand.
5. SSID Profile Optimization:
- Use a clean SSID profile and apply optimizations step by step.
- Observe behavior after each change to identify potential issues.
If the issue persists, provide logs to Ascom support for further analysis.
This answer is automatically generated