Table of Contents
Advertisement
MAINTENANCE WORK ON FRAME AND ENGINE
Changing the low beam bulb
9.59
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Close the fuse box cover.
–
Fit the seat. (
–
Switch off all power consumers and the engine.
–
Fold up the combination instrument. Pull the lug
–
Remove the rubber retainer.
100742-10
p. 153)
out of the rubber retainer
165
.
Advertisement
Table of Contents
