Table of Contents
Advertisement
STORAGE
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.
Putting into operation after storage
15.2
–
Take the front of the motorcycle off the work stand. (
–
Take the rear from the work stand. (
–
Recharge the battery.
x
–
Install the battery.
x
(
–
Set the clock with SET CLOCK. (
–
Fill up with fuel. (
p. 95)
–
Make checks before putting into operation. (
–
Take a test ride.
p. 101)
(
p. 159)
p. 157)
p. 68)
p. 87)
p. 100)
220
Advertisement
Table of Contents
