Table of Contents
Advertisement
SERVICE SCHEDULE
Service schedule
8.1
Check that the electrical equipment is functioning properly.
Read out the trouble code memory using the KTM diagnostics tool.
Change the engine oil and filter, clean the oil screen.
Check the oil jet for the clutch lubrication.
Check the front brake linings. (
Check the front brake discs. (
Check the rear brake linings. (
Check the rear brake disc. (
Check that brake lines are undamaged and free of leaks.
Check the rear brake fluid level. (
Check the free travel of the foot brake lever. (
Check that the shock absorber and fork are leak tight. If necessary and depending on use, service
the fork and shock absorber.
Check the swingarm bearings.
Check wheel bearings for play.
Check the tire condition. (
Check the tire pressure. (
Check the chain, rear sprocket and engine sprocket. (
Check the chain tension. (
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation.
Clean the dust boots of the fork legs.
Check the front brake fluid level. (
x
x
p. 138)
p. 133)
p. 141)
p. 134)
p. 139)
p. 125)
x
x
p. 150)
p. 152)
p. 131)
p. 128)
p. 136)
x
(
p. 195)
K10N
K100A
K200A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
x
•
•
•
•
•
97
K400A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Advertisement
Table of Contents
