MAINTENANCE WORK ON FRAME AND ENGINE
Adjusting the rear frame position
9.76
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behavior.
–
Remove the seat. (
–
Remove screws
100762-10
Setting a higher seat position:
–
Remove screw
–
Push the rear end down until the drill holes of the frame are level with the lower
front drill holes of the rear.
100763-10
p. 153)
with the bushings.
with washer on the left and right sides of the vehicle.
191