CONTROLS
Adjusting shift speed RPM1/2
5.49
–
Press the MODE button briefly.
The settings are stored and the display changes to the SET‑UP menu.
–
Press the button
info display.
–
Press the MODE button briefly.
Condition
The ignition is on.
The motorcycle is stationary.
–
Press the button
–
Press the button
display.
–
Press the MODE button briefly.
–
Press the MODE button briefly.
RPM1 and RPM2 appear in the info display.
The engine speed after RPM1 flashes.
Info
400460-01
The engine speed can be set at intervals of 50.
RPM1 is the engine speed above which the shift warning light starts to flash.
–
Set the engine speed with the button
–
Press the MODE button briefly.
The engine speed after RPM2 flashes.
briefly and repeatedly until the symbol
and the button
for 3 - 5 seconds.
twice until the symbol
appears in front of SETTINGS in the info
or the button
shows EXIT SETUP in the
.
69