Table of Contents
Advertisement
MAINTENANCE WORK ON FRAME AND ENGINE
Adjusting the basic position of the hand brake lever
9.34
–
Check the thickness of the brake disc in several places to see if it conforms to measure-
ment
.
Info
Wear reduces the thickness of the brake disc in area
Brake disc - wear limit
Rear
»
If the brake disc thickness is less than the specified value:
400480-10
–
Change the brake disc.
–
Check the brake disc for damage, cracking and deformation.
»
If damage, cracks or deformation are visible on the brake disc:
–
Change the brake disc.
–
Pull the brake lever forwards.
–
Adjust the basic setting of the hand brake lever to your hand size by turning adjusting
wheel
.
Info
Do not make any adjustments while riding!
100711-10
4.5 mm (0.177 in)
x
x
135
of the brake disc.
Advertisement
Table of Contents
