CONTROLS
Odometer menu ODO/Trip 2
5.20
Press the MODE but-
ton for 3 - 5 sec-
onds.
Press the MODE but-
ton briefly.
Condition
•
The ignition is on.
•
ROAD Mode
–
Press the MODE button briefly and repeatedly until ODO appears at the top left of the
info display.
ODO shows the total distance covered.
Trip 2 shows the distance covered since the last reset. For example, between two refueling
stops. Trip 2 is always running and counts up to 9999.9.
Time 2 shows the journey time on the basis of Trip 2 and resumes running as soon as a
400579-01
speed signal is received.
The calculation of this value starts with the first speed signal and ends 3 seconds after the
last speed signal.
Avs 2 (average speed) is coupled with Trip 2 and Time 2.
Press the button
Press the button
Press the button
and the button
3 - 5 seconds.
Press the MODE but-
ton for 3 - 5 sec-
onds.
The display of Trip 1, Time 1 and Avs 1 is reset
Next display mode
.
No function
.
No function
The display changes to the SET‑UP menu
for
The display of Trip 2, Time 2 and Avs 2 is reset
36