Afina™ 5 Assembly Guide - Peak Pilates AFINA Owner's Manual And Assembly Manual

AFINA™ 5 ASSEMBLY GUIDE
For the clients that have chosen the reformer equipped with ropes and risers, the
Afina™ Reformer allows for easy installation of ropes and pulleys to the risers. Your
reformer frame will have holes in the head end to accommodate the installation of
the risers.
All straps, ropes and handles must be secured before use. These are the moving
parts that are frequently interchanged with other accessories and they are essential
to providing the fluid movement. Before use, be sure that the ropes and straps are
not twisted so they can easily move through the pulleys.
Installing the Risers
Fig. 5
1. Unpack the risers and screws, being
careful not to scratch the wood with any
of your cutting tools.
2. Locate the group of four holes on the
inside of the head end of the reformer
frame.
3. Align the four holes in the risers with
the four holes on the head end of the
reformer.
Note: The risers must be placed on the
outside of the reformer frame with the
pulleys pointing inward.
4. Secure the risers to the frame using
the screws, washers and special nuts
with two Allen keys as shown in Fig. 5.
16
PEAK PILATES
®